100101 1875mm Long Laundry Chute Kit with a door


SKU: 100101 Categories: ,


100101 1875mm Laundry Chute Kit with a door is designed to move laundry from the first to the ground floor.  The laundry chute starts with a door located approx 1000mm off the finished floor.  The total length of the chute including the  90 deg elbow is 1875mm long. This laundry chute would finish approx 675mm off the finished ceiling depending on the ceiling depth.

The chute is 300mm in diameter.

The minimum boxing required for a 300mm diameter laundry chute is 400 mm x 450 mm

Laundry chute location.
Typical locations for the start of a laundry chute are on the landing, family bathroom or en-suite. Most laundry chutes finish in the utility room, kitchen or ground floor cupboard with a laundry basket below. Our laundry chutes can either finish at a high level (between 150mm and 500mm from the ceiling) or lower around 1400mm off the finished floor level. To use space efficiently, it is best to have the chute finishing about 150mm below the ceiling above a shelf where the laundry basket resides. This allows space underneath to be used.

Mounting brackets hold the chute in place and are always located on the first component below a door and on the last piece at the bottom, which is usually a 500mm or 1000mm end piece.  A safe rule of thumb is to use a mounting bracket per floor or every third component.  Locking bands are located where two components interlock, they stop the chute from twisting and you don’t need one on every join. Our installation manual takes you through the process step by step.

The laundry chute doesn’t need to be straight; it must have a continuous fall for the laundry. If you need to change direction, use 45°, 30° or 15° elbows.

The minimum boxing required for a 300mm chute is 400mm x 450mm.

Included in this laundry chute kit:
* 1 x 1hr Flushmount Laundry Chute door (30800)
* 1 x back box (30802)
* 1 x 90 deg elbow (30090)
* 1 x 500mm ext piece (30500)
* 2 x mounting bracket (30190)
* 1 x locking band (30180)
* 1 x 1000mm end piece (31000E)


Additional information




There are no reviews yet.

Be the first to review “100101 1875mm Long Laundry Chute Kit with a door”

Your email address will not be published. Required fields are marked *

Scroll to Top