Sale!

100103 300mm Laundry Chute Kit – Two Storey Home High Level Termination

£1,135.78 £965.42

Description

300mm Laundry Chute Kit For Two Storey Home With Low Level Termination is designed for a single straight drop finishing approx 900mm from the ceiling.

The size of the laundry chute design depends on the amount of space you have available. The encasement determines the area for the chute. Below we have listed the minimum boxing needed.

The minimum boxing required:

250 mm diameter laundry chute is 300 mm x 350 mm

300 mm diameter laundry chute is 400 mm x 450 mm

400 mm diameter laundry chute is 500 mm x 550 mm.

Laundry chute location.

Typical locations for the start of a laundry chute are on the landing, family bathroom or en-suite. Most laundry chutes finish in the utility room, kitchen or ground floor cupboard with a laundry basket below. Our laundry chutes can either finish at a high level (between 150mm and 500mm from the ceiling) or lower around 1400mm off the finished floor level.   To use space efficiently, it is best to have the chute finishing about 150mm below the ceiling above a shelf where the laundry basket resides. This allows space underneath to be used.

Mounting brackets hold the chute in place and are always located on the first component below a door and on the last piece at the bottom, which is usually a 500mm or 1000mm end piece.  A safe rule of thumb is to use a mounting bracket per floor or every third component.  Locking bands are located on a join of two components where there is no bracket. They stop the chute from twisting and you don’t need one on every join.  Our installation manual takes you through the process step by step.

The laundry chute doesn’t need to be straight; it must have a continuous fall for the laundry.  If you need to change direction, use 45°, 30° or 15° elbows.Laundry Chute Location


Minimum boxing required for 300mm chute is 400mm x 450mm.


Included in this Laundry Chute kit:

The minimum boxing required for 300mm chute is 400mm x 450mm.

Included in this Laundry Chute kit:
1 x 2hr White Flush Mount Door (30602)
1 x Back box (30603)
1 x 90 deg Elbow (30090)
1 x 1000mm Ext Piece (31000)
2 x Mounting Bracket (30190)
1 x Locking Band (30180)
1 x 1000mm End Piece (31000E)

500 and 600mm diameter laundry chute components for larger commercial projects are manufactured as required

Reviews

There are no reviews yet.

Be the first to review “100103 300mm Laundry Chute Kit – Two Storey Home High Level Termination”

Your email address will not be published. Required fields are marked *

Scroll to Top